RI=0, CMPE=0, RN=0, RIE=0
Voltage Monitor 1 Circuit Control Register 0
| RIE | Voltage Monitor 1 Interrupt/ Reset Enable 0 (0): Disabled 1 (1): Enabled |
| Reserved | This bit is read as 0. The write value should be 0. |
| CMPE | Voltage Monitor 1 Circuit Comparison Result Output Enable 0 (0): Voltage monitor 1 circuit comparison result output disabled. 1 (1): Voltage monitor 1 circuit comparison result output enabled. |
| Reserved | These bits are read as 000. The write value should be 000. |
| RI | Voltage Monitor 1 Circuit Mode Select 0 (0): Voltage monitor 1 interrupt during Vdet1 passage 1 (1): Voltage monitor 1 reset enabled when the voltage falls to and below Vdet1 |
| RN | Voltage Monitor 1 Reset Negate Select 0 (0): Negation follows a stabilization time (tLVD1) after VCC > Vdet1 is detected. 1 (1): Negation follows a stabilization time (tLVD1) after assertion of the LVD1 reset. |